JOHN DEERE 4010 John Deere Models: 3005 thru 4995

INCLUDES: PPA, WOVEN PTO DISC, 5 PAD ENGINE DISC, RELEASE & PILOT BEARINGS
FLYWHEEL STEP 2.844"

INCLUDES: PPA, WOVEN PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC ENGINE DISC, RELEASE & PILOT BEARINGS
FLYWHEEL STEP 2.844"

INCLUDES: PPA, WOVEN PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC ENGINE DISC, AETNA TRANSMISSION RELEASE BEARING, PTO RELEASE BEARING & PILOT BEARING
FLYWHEEL STEP 2.844"

INCLUDES: PPA WITH 6 PAD PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC ENGINE DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING
FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH 6 PAD PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC ENGINE DISC, PTO RELEASE BEARING, TRANSMISSION AETNA RELEASE BEARING & PILOT BEARING FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH HEAVY DUTY SPRINGS, WOVEN PTO DISC, 5 CARBOTIC PAD ENGINE DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING
FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH HEAVY DUTY SPRINGS, WOVEN PTO DISC, NEW DESIGN, SMOOTH ENGAGING CARBOTIC 6 PAD ENGINE DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING
FLYWHEEL STEP: 2.844"

INCLUDES: PPA WITH HEAVY DUTY SPRINGS, HEAVY DUTY 6 PAD PTO DISC, NEW DESIGN, SMOOTH ENGAGING CARBOTIC 6 PAD ENGINE DISC, RELEASE & PILOT BEARINGS
FLYWHEEL STEP: 2.844"

OEM
INCLUDES: WOVEN PTO DISC
FLYWHEEL STEP: 2.844"
(NEW AVAILABLE)

OEM
INCLUDES: WOVEN PTO DISC
FLYWHEEL STEP: 2.844"

INCLUDES: PPA & 6 PAD PTO DISC
FOR HEAVY PTO USE
FLYWHEEL STEP: 2.844"

INCLUDES: PPA W/ HEAVY DUTY SPRINGS, WOVEN PTO DISC
FLYWHEEL STEP 2.844"

INCLUDES: PPA WITH HEAVY DUTY SPRINGS, HEAVY DUTY 6 PAD PTO DISC
FLYWHEEL STEP 2.844"

FERAMIC LINING

LIGHT DUTY USE
NO WARRANTY ON WOVEN DISC OR PPA IF WOVEN USED

OEM

NEW DESIGN, SMOOTH ENGAGING, LESS ABRASIVE
RECOMMENDED FOR LOADER APPLICATIONS
(NEW AVAILABLE)

GREASABLE

NON-GREASABLE AETNA BEARING

GREASABLE

DIESEL WITH SYNCHRO-RANGE
INCLUDES: RING GEAR & NEW DOWEL PINS

DIESEL WITH SYNCHRO-RANGE
INCLUDES: RING GEAR

FITS GAS AND DIESEL FLYWHEELS - MODELS WITH SYNCRO-RANGE TRANSMISSION

KIT INCLUDES: R33552 NEW, R26799 NEW & R44831 NEW CAST PLATES, R26688 PTO DISC, R41413 PTO AND TRANS LEVER KIT, R41414 SPRING KIT, (3) R49579 ROCKER BOLTS WITH NUTS & (3) R55184 PTO ADJUSTING BOLTS AND NUTS.

INCLUDES: R33552 NEW & R26799 NEW

WITH ROUND DRIVE PINS

FITS WITH R26799 FRONT PTO PLATE

FITS WITH R26799 FRONT PTO PLATE, (R33552 NEW AVAILABLE)

FITS WITH 40733 FRONT PTO PLATE
CHECK CASTING NUMBERS BEFORE ORDERING

FITS WITH R46095 FRONT PTO PLATE

FITS: WITH R46095 FRONT PTO PLATE

FITS WITH R33552 BOTTOM CAST PLATE; (R26799 NEW AVAILABLE)

FITS WITH R40732 BOTTOM CAST PLATE
CHECK CASTING NUMBERS BEFORE ORDERING

FITS WITH R46094 OR R51391
(NEW AVAILABLE)

REQUIRES 3/8" ADJ BOLT R26804

REQUIRES 3/8" ADJ BOLT R26804
CHECK CASTING NUMBERS BEFORE ORDERING

CHECK CASTING NUMBERS BEFORE ORDERING
REQUIRES: 7/16" ADJ BOLT R55184
REPLACES R26658 & R41178
(NEW AVAILABLE)

FITS WITH R46094 OR R51391

FITS WITH R33552 BOTTOM CAST PLATE

CHECK CASTING NUMBERS BEFORE ORDERING
REQUIRES: 7/16" ADJ BOLT R55184
REPLACES R26658 & R41178

INCLUDES: 3 TRANSMISSION LEVERS, PINS AND ANTI-RATTLE SPRINGS AND 3 PTO LEVERS AND PINS

INCLUDES: 15 INNER & 15 OUTER PRESSURE SPRINGS AND 3 PTO RETURN SPRINGS

TRANSMISSION INNER PRESSURE SPRING
Required: 15

TRANSMISSION OUTER PRESSURE SPRING

PTO PLATE RETURN SPRING

TRANSMISSION LEVER SPRING

TRANSMISSION

TRANSMISSION

TRANSMISSION
Required: 3

PTO; 3/8" 24 THREAD

7/16" 20 THREAD
Required: 3

(R97872 NEW AVAILABLE);
THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM. IT DOES NOT HAVE AN INLET PORT ON THE MOUNTING FLANGE RIGHT SIDE.
NOTE: THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT.
IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED.

THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

1 1/16" MALE O-RING x 7/8" MALE JIC

45 DEGREE HYDRAULIC PUMP FITTING 1 1/16" MALE O-RING x 7/8" MALE JIC

FITS: 4 C.I. (65cc) PUMPS WITH SERIAL PLATE
INCLUDES: CAMSHAFT, CAM BUSHING & ROLLERS, SHAFT BEARINGS & THRUST WASHERS

FITS: 4 C.I. (65cc) PUMPS WITHOUT SERIAL PLATE

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R34348 SHAFT

USE WITH R34348 SHAFT AND
USE WITH R45874B & R45874BR BUSHINGS
Required: 2

USE WITH R79152, R79154 & R79156 SHAFTS
USE WITH R80558B & R80558BR BUSHINGS
Required: 2

USE WITH R79152, R79154, R79156 & R34348 SHAFTS
Required: 2

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH SCREW ON CAP

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH SCREW ON CAP

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH CLIP ON CAP

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH CLIP ON CAP

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

INCLUDES: HUB AND MOUNTING GASKET

INCLUDES: HUB AND MOUNTING GASKET

INCLUDES: MOUNTING GASKET, R940210 KIT AVAILABLE

INCLUDES: HUB & MOUNTING GASKET
R940210 KIT AVAILABLE

INCLUDES: MOUNTING GASKET
R940210 KIT AVAILABLE

UNIVERSAL FITS ALL GAS MODELS
INCLUDES: HUB & MOUNTING GASKET
R940210 KIT AVAILABLE

FITS: R34981, R41317, R44116, R41313 & R45330
INCLUDES: GASKET, SPRING SEAL & BEARING

SEAL INSTALLER FOR THE INSTALLATION OF UNITIZED WATER PUMP SEALS

INCLUDES: HUB, BACKPLATE, BACKPLATE GASKET AND MOUNTING GASKET.

INCLUDES: MOUNTING GASKET, R935010 KIT AVAILABLE

INCLUDES: HUB, BACKPLATE, BACKPLATE GASKET & MOUNTING GASKET

INCLUDES: MOUNTING GASKET

UNIVERSAL FITS ALL DIESEL MODELS EXCEPT R41316 INCLUDES: HUB, BACKPLATE, BACKPLATE GASKET & MOUNTING GASKET R934020 KIT AVAILABLE (NEW AVAILABLE)

FITS: R34982 & R45332
INCLUDES: 2 GASKETS, SPRING SEAL & BEARING

SEAL INSTALLER FOR THE INSTALLATION OF UNITIZED WATER PUMP SEALS

FOR INSTALLATION OF R22764 REAR MAIN SEAL

3/16" X 31/64"-18 PER SET

3/16" X 43/64"- 18 PER SET

3/16" X 1 11/32" - 18 PER SET

FOR INSTALLATION OF R22764 REAR MAIN SEAL

SYNCRO-RANGE TRANSMISSION