JOHN DEERE 2510 John Deere Models: 1010 thru 2955

GREASABLE

NON-GREASABLE AETNA BEARING

INCLUDES: 9" 1 11/16" 26 SPLINE SOLID CENTER 4 PAD PTO DISC

INCLUDES: R38286 PTO DISC
FLYWHEEL STEP: 2.844"

GREASEABLE

NON-GREASABLE AETNA BEARING

FITS: HI-LOW SYNCRONIZER
Required: 8

FITS HI-LOW SYNCRONIZER
Required: 6

FITS: R38186 FRONT PTO PLATE
CHECK CASTING NUMBERS BEFORE ORDERING

TRANSMISSION INNER PRESSURE SPRING
Required: 9

TRANSMISSION OUTER PRESSURE SPRING

PTO PLATE RETURN SPRING

TRANSMISSION

TRANSMISSION
Required: 3

THIS IS A 40 CM (2.4 CI), EARLY - STRAIGHT SIDE HYDRAULIC PUMP WITH PRESSURE ADJUSTMENT FITTING ON TOP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT

(R97872 NEW AVAILABLE);
THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

1 1/16" MALE O-RING x 7/8" MALE JIC

45 DEGREE HYDRAULIC PUMP FITTING 1 1/16" MALE O-RING x 7/8" MALE JIC

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R79152, R79154 & R79156 SHAFTS

USE WITH R34348 SHAFT

USE WITH R34348 SHAFT AND
USE WITH R45874B & R45874BR BUSHINGS
Required: 2

USE WITH R79152, R79154 & R79156 SHAFTS
USE WITH R80558B & R80558BR BUSHINGS
Required: 2

USE WITH R79152, R79154, R79156 & R34348 SHAFTS
Required: 2

DISTRIBUTOR: PRESTOLITE

DISTRIBUTOR: PRESTOLITE

DISTRIBUTOR: PRESTOLITE
DIST. HOUSING/TAG #1BT-4101 R, S OR U

DISTRIBUTOR: AUTOLITE
DIST. HOUSING/TAG #1BT-4101L

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

INCLUDES: MOUNTING GASKET AND BACKPLATE GASKET, R932510 KIT AVAILABLE

INCLUDES: MOUNTING GASKET AND BACKPLATE GASKET, R932520 KIT AVAILABLE

INCLUDES: BACKPLATE GASKET & MOUNTING GASKET
R932240 KIT AVAILABLE

FITS: R23629
INCLUDES: 2 GASKETS, SPRING SEAL, BEARING & IMPELLER

FITS: R54805, R55130, R55164 & R59049 INCLUDES: 2 GASKETS, SPRING SEAL, BEARING & IMPELLER

SEAL INSTALLER FOR THE INSTALLATION OF UNITIZED WATER PUMP SEALS

ONE PIECE TEFLON SEAL AND WEAR SLEEVE ASSEMBLY
SUB FOR AT22965, AR92893, RE11036, RE17831, RE24959