Humboldt, Iowa

Dealers

Stay logged in

JOHN DEERE 500 John Deere Models: 105 thru 595

12" SYNCHRO RANGE CLUTCH

Top of Page

DUAL STAGE CLUTCH KIT

KIT INCLUDES: PPA WITH WOVEN PTO DISC, WOVEN ENGINE DISC,PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING, FLYWHEEL STEP: 2.844" NO WARRANTY

  • SIZE:12"
  • TYPE:DUAL STAGE
  • CORE #:159
  • CORE PRICE:$115.00

DUAL STAGE CLUTCH KIT

KIT INCLUDES: PPA WITH WOVEN PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING. FLYWHEEL STEP: 2.844"

  • SIZE:12"
  • TYPE:DUAL STAGE
  • CORE #:159
  • CORE PRICE:$115.00

DUAL STAGE CLUTCH KIT

INCLUDES: PPA WITH WOVEN PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, AETNA TRANSMISSION RELEASE BEARING & PILOT BEARING. FLYWHEEL STEP: 2.844"

  • SIZE:12"
  • TYPE:DUAL STAGE
  • CORE #:159
  • CORE PRICE:$115.00

CLUTCH KIT DUAL STAGE W / HD PTO DISC

INCLUDES: PPA WITH 4 PAD PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, TRANSMISSION RELEASE BEARING & PILOT BEARING; FLYWHEEL STEP: 2.844"

  • SIZE:12"
  • TYPE:DUAL STAGE
  • CORE #:159
  • CORE PRICE:$115.00

CLUTCH KIT DUAL STAGE W / HD PTO DISC

INCLUDES: PPA WITH 4 PAD PTO DISC, NEW DESIGN SMOOTH ENGAGING 6 PAD CARBOTIC DISC, PTO RELEASE BEARING, AETNA TRANSMISSION RELEASE BEARING & PILOT BEARING; FLYWHEEL STEP: 2.844"

  • SIZE:12"
  • TYPE:DUAL STAGE
  • CORE #:159
  • CORE PRICE:$115.00

DUAL STAGE PRESSURE PLATE ASSEMBLY

(R31311 NEW AVAILABLE); W/NEW CAST, INCLUDES: WOVEN PTO DISC, FLYWHEEL STEP: 2.844

  • SIZE:12"
  • LEVERS:6
  • SPRINGS:12
  • HUB/SPLINE:1 11/16" - 26
  • TYPE:DUAL STAGE
  • CORE #:170
  • CORE PRICE:$100.00

DUAL STAGE PRESSURE PLATE ASSEMBLY

INCLUDES: WOVEN PTO DISC, FLYWHEEL STEP: 2.844"

  • SIZE:12"
  • LEVERS:6
  • SPRINGS:12
  • HUB/SPLINE:1 11/16" - 26
  • TYPE:DUAL STAGE
  • CORE #:170
  • CORE PRICE:$100.00

DUAL STAGE PRESSURE PLATE ASSEMBLY W/ HD PTO

INCLUDES: 4 PAD PTO DISC, FLYWHEEL STEP 2.844"

  • SIZE:12"
  • LEVERS:6
  • SPRINGS:12
  • HUB/SPLINE:1 11/16" - 26
  • TYPE:DUAL STAGE
  • CORE #:170
  • CORE PRICE:$100.00

WOVEN PTO DISC

  • SIZE:10"
  • HUB:1 11/16"
  • SPLINE:26
  • CENTER:SOLID
  • CORE #:130
  • CORE PRICE:$15.00

4 PAD PTO DISC

  • SIZE:10"
  • HUB:1 11/16"
  • SPLINE:26
  • CENTER:SOLID
  • CORE #:130
  • CORE PRICE:$15.00

NEW WOVEN

NO WARRANTY ON WOVEN DISC OR PPA IF WOVEN USED.

  • SIZE:12"
  • HUB:1 1/16"
  • SPLINE:16
  • CENTER:SOLID
  • CORE #:130
  • CORE PRICE:$15.00

5 LARGE CARBOTIC PAD DISC

  • SIZE:12"
  • HUB:1 1/16"
  • SPLINE:16
  • CENTER:SOLID
  • CORE #:130
  • CORE PRICE:$15.00

6 LARGE PADS

  • SIZE:12"
  • HUB:1 1/16"
  • SPLINE:16
  • CENTER:SOLID
  • CORE #:130
  • CORE PRICE:$15.00

RELEASE BEARING

GREASEABLE

  • OD:3.687"
  • ID:2.000"
  • THICKNESS:.807"

RELEASE BEARING

NON-GREASABLE AETNA BEARING

  • OD:3.687"
  • ID:2.000"
  • THICKNESS:.807"

RELEASE BEARING

PTO
  • OD:3.936"
  • ID:2.557"
  • THICKNESS:.704"

PILOT BEARING

  • OD:1.5748"
  • ID:.6693"
  • THICKNESS:.4724"

ALIGNMENT TOOL

ONLY FITS SYNCHRO TRANSMISSION CLUTCHES
  • LARGE SPLINE:1 11/16" - 26
  • SMALL SPLINE:1 1/16" - 16
  • PILOT DIAMETER:0.670"

13" CLUTCH POWERSHIFT

Top of Page

PRESSURE PLATE ASSEMBLY

SERIES B
  • SIZE:13"
  • LEVERS:3
  • SPRINGS:12
  • TYPE:SINGLE STAGE
  • CORE #:140
  • CORE PRICE:$20.00

WOVEN DISC

SERIES B
  • SIZE:13"
  • HUB:1 1/4"
  • SPLINE:19
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$15.00

6 REGULAR PAD DISC

SERIES B
  • SIZE:13"
  • HUB:1 1/4"
  • SPLINE:19
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$15.00*

RELEASE BEARING

SERIES B

GREASABLE

  • OD:3.500"
  • ID:2.062"
  • THICKNESS:.750"

RELEASE BEARING

SERIES B

NON-GREASABLE AETNA BEARING

  • OD:3.500"
  • ID:2.062"
  • THICKNESS:.750"

PILOT BEARING

SERIES B
  • OD:1.5748"
  • ID:.6693"
  • THICKNESS:.4724"

ALIGNMENT TOOL

ONLY FITS POWERSHIFT CLUTCHES
  • LARGE SPLINE:1 7/8" - 29
  • SMALL SPLINE:1 1/4" - 19
  • PILOT DIAMETER:0.670"

HYDRAULIC PUMP & PARTS

Top of Page

HYDRAULIC PUMP

THIS IS A 40 CM (2.4 CI), EARLY - STRAIGHT SIDE HYDRAULIC PUMP WITH PRESSURE ADJUSTMENT FITTING ON TOP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT

  • CORE #:220
  • CORE PRICE:$150.00*

HYDRAULIC PUMP

(R97872 NEW AVAILABLE);
THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM. NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

  • CORE #:220
  • CORE PRICE:$150.00*

HYDRAULIC PUMP

THIS IS A 50 CM (3 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON THE MOUNTING FLANGE LEFT SIDE , A 7/8" PRESSURE PORT IN THE PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON THE BOTTOM. IT DOES NOT HAVE AN INLET PORT ON THE MOUNTING FLANGE RIGHT SIDE.
NOTE: THE INDICATED SIDES OF PUMP ARE AS SEEN FROM THE TRACTOR SEAT.
IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED.

  • CORE #:220
  • CORE PRICE:$150.00*

HYDRAULIC PUMP

THIS IS A 40 CM (2.4 CI) HYDRAULIC PUMP
THIS PUMP HAS A 1 1/16" INLET PORT ON MOUNTING FLANGE LEFT SIDE , A 1 5/8" INLET PORT ON MOUNTING FLANGE RIGHT SIDE, A 1 1/16" PRESSURE PORT IN PUMP BODY ON RIGHT SIDE, A 7/8" COOLER RETURN PORT ON TOP AND A 3/8" DRAIN PORT ON BOTTOM.
NOTE: IF YOUR APPLICATION DOES NOT HAVE A DRAIN LINE THE INSTALLATION OF J D PART AR39810 DRAIN LINE KIT IS REQUIRED
THE INDICATED SIDES OF THE PUMP ARE AS SEEN FROM THE TRACTOR SEAT

  • CORE #:220
  • CORE PRICE:$150.00*

JD HYDRAULIC PUMP FITTING

1 1/16" MALE O-RING x 7/8" MALE JIC

JD HYDRAULIC PUMP FITTING

45 DEGREE HYDRAULIC PUMP FITTING 1 1/16" MALE O-RING x 7/8" MALE JIC

HYDRAULIC PUMP BUSHING W/ROLLERS

USE WITH R79152, R79154 & R79156 SHAFTS

HYDRAULIC PUMP BUSHING

USE WITH R79152, R79154 & R79156 SHAFTS

HYDRAULIC PUMP BUSHING

USE WITH R34348 SHAFT

HYDRAULIC PUMP THRUST WASHER

USE WITH R34348 SHAFT AND
USE WITH R45874B & R45874BR BUSHINGS
Required: 2

HYDRAULIC PUMP THRUST WASHER

USE WITH R79152, R79154 & R79156 SHAFTS
USE WITH R80558B & R80558BR BUSHINGS
Required: 2

HYDRAULIC PUMP BEARING

USE WITH R79152, R79154, R79156 & R34348 SHAFTS
Required: 2

ELECTRONIC IGNITION

Top of Page

ELECTRONIC IGNITION CONVERSION

DISTRIBUTOR: DELCO
FITS: DISTRIBUTORS WITH SCREW ON CAP
CCW ROTATION

  • DISTRIBUTOR MAKE:DELCO
  • VOLTS/GROUND:12V - NEG
  • CYLINDERS:4

IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

  • OHM:3.0
  • VOLTS:12

CHROME IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 12V ELECTRICAL SYSTEM

  • OHM:3.0
  • VOLTS:12

IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

  • OHM:1.5
  • VOLTS:6

CHROME IGNITION COIL

2, 3, 4 OR 6 CYLINDER APPLICATIONS WITH 6V ELECTRICAL SYSTEM

  • OHM:1.5
  • VOLTS:6

TOOLS

Top of Page

ALIGNMENT TOOL

ONLY FITS SYNCHRO TRANSMISSION CLUTCHES
  • LARGE SPLINE:1 11/16" - 26
  • SMALL SPLINE:1 1/16" - 16
  • PILOT DIAMETER:0.670"

ALIGNMENT TOOL

ONLY FITS POWERSHIFT CLUTCHES

  • LARGE SPLINE:1 7/8" - 29
  • SMALL SPLINE:1 1/4" - 19
  • PILOT DIAMETER:0.670"
AG PARTS ONLINE
AP Air, INC.
AP Truck Parts
DKC_SOLUTIONS
ROMAINE ELECTRIC
Spencer Diesel

Shopping Cart Update Cart ()

Loading...