FOR HYDRO TRACTORS
FOR 12" FLYWHEELS WITH 132 TEETH
REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT
REQ. WHEN ORDERING PART NUMBER 9203
2 REQ. FOR RANGE TRANSMISSION, 3 REQ. FOR SPEED TRANSMISSION
INCLUDES: MISC. PLUGS AND GASKET FILLER TUBE NOT INCLUDED
NEW SPRING LOADED
PARK LOCK LINK REPLACEMENT
WITH NUT, KEY & O-RINGS
W/NUT, KEY AND O-RINGS NOT COMPATIBLE WITH PIGGY BACK PUMP
2000 PSI
FITS: 7031, 70932, 70933 & 70935
OPTION FOR 318884 O-RING
OPTION FOR 386867 O-RING
COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS. FOR UNITS WITH SPRING ACTIVATED BRAKES
OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK. DOES NOT INCLUDE BRAKE PISTONS FOR UNITS WITH SPRING ACTIVATED BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE FOR UNITS WITH SPRING ACTIVATED BRAKES
COMPLETE GASKET, O-RING & SEAL PACKAGE WITH HEAVY DUTY CLUTCH DRUM SEAL RINGS FOR UNITS WITH SPRING ACTIVATED BRAKES
GASKET & O-RING PACKAGE FOR CLUTCH DRUM SERVICE ONLY
INCLUDES: CAST CLUTCH DRUM SEAL RINGS
CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES
CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES
CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES
FOR USE WITH SPRING ACTIVATED BRAKES
INCLUDES: CONTROL VALVE GUIDE, CONTROL VALVE GUIDE STEM & CONTROL VALVE DOWEL FOR SINGLE & DUAL SPEED PTO UNITS WITH SPRING APPLIED BRAKES
CONTROL VALVE SEAL
CONTROL VALVE SEAL PLUG ORING FITS UNITS WITH HYDRAULIC AND SPRING APPLIED BRAKES
PTO CLUTCH DRUM RETAINING SNAP-RING
FOR 1000 RPM SHAFT
FOR 540 RPM SHAFT
BEARING RETAINING RING
PTO IDLER GEAR - DUAL SPEED ONLY
540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
SPACER FOR 540 SHAFT DRIVEN GEAR - DUAL SPEED ONLY
540 & 1000 RPM REAR PTO OUTPUT SHAFTS
PTO IDLER SHAFT - DUAL SPEED ONLY
IDLER GEAR THRUST WASHER - DUAL SPEED ONLY - 2 REQUIRED
IDLER GEAR BEARING - DUAL SPEED PTO ONLY - 2 REQUIRED
540 OUTPUT SHAFT FRONT BEARING - DUAL SPEED ONLY
PTO UNIT TO TRACTOR
INCLUDES: SEAL, EXTERNAL REPAIR FOR 540 RPM SHAFT SEAL LEAKAGE
FOR UNITS WITH SPRING APPLIED BRAKES 3 REQUIRED
FOR UNITS WITH SPRING APPLIED BRAKES, (NEW AVAILABLE) 3 REQUIRED
FOR CONTROL VALVE
FITS: 540 RPM AND 1 3/8" 1000 RPM SHAFTS 2 REQUIRED
TEFLON CLUTCH DRUM SEAL RING
CAST CLUTCH DRUM SEAL RING HD OPTION FOR 381485
CLUTCH DRUM TO SHAFT O-RING
CLUTCH PISTON INNER O-RING
PTO CLUTCH FRICTION DISC Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
HD OPTION FOR 381490 Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK
51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863971
6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE CAN ONLY BE USED WITH 1863972
INCLUDES: HUB & MOUNTING O-RING (NEW AVAILABLE)
INCLUDES: HEAVY DUTY BEARING, PRESSED ON HUB & MOUNTING O-RING
INCLUDES: HUB & MOUNTING O-RING
FOR INSTALLATION OF 1809964 REAR MAIN SEAL
OUTER
INNER Required: 1 PER SIDE