Humboldt, Iowa

Dealers

Stay logged in

INTERNATIONAL 966 International Models: 100 thru 986

12" SINGLE STAGE CLUTCH

Top of Page

CLUTCH KIT

KIT INCLUDES:
PPA
6 PAD DISC
RELEASE AND PILOT BEARINGS
FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • TYPE:SINGLE STAGE
  • CORE #:152
  • CORE PRICE:$29.00

CLUTCH KIT

KIT INCLUDES:
PPA
6 PAD DISC
RELEASE AND PILOT BEARINGS
FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • TYPE:SINGLE STAGE
  • CORE #:152
  • CORE PRICE:$29.00

PRESSURE PLATE ASSEMBLY

FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

PRESSURE PLATE ASSEMBLY

FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

PRESSURE PLATE ASSEMBLY W/NEW CAST

FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

PRESSURE PLATE ASSEMBLY W/9 RIVET HUB

FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

PRESSURE PLATE ASSEMBLY W/BOLTED HUB

FLYWHEEL STEP: 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

4 REGULAR PADS DISC

(NEW AVAILABLE)

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

4 REGULAR PADS DISC

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

4 LARGE PADS DISC

(NEW AVAILABLE)

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

4 LARGE PADS DISC

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

4 LARGE PAD DISC - THICK ON FLYWHEEL SIDE

RECOMMENDED FOR FLYWHEELS THAT HAVE BEEN MACHINED BELOW SPECIFICATIONS FOR CLEARANCE OF CRANKSHAFT MOUNTING BOLTS.

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

6 LARGE PADS DISC

(NEW AVAILABLE)

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

6 LARGE PADS DISC

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

6 LARGE CARBOTIC PAD DISC

LESS ABRASIVE RECOMMENDED FOR LOADER APPLICATION.

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

6 LARGE PAD DISC - THICK ON FLYWHEEL SIDE

RECOMMENDED FOR FLYWHEELS THAT HAVE BEEN MACHINED BELOW SPECIFICATIONS FOR CLEARANCE OF CRANKSHAFT MOUNTING BOLTS.

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

RELEASE BEARING ASSEMBLY KIT

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

RELEASE BEARING ASSEMBLY KIT

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

RELEASE BEARING

GREASEABLE

  • OD:4.154"
  • ID:2.500"
  • THICKNESS:.865"

RELEASE BEARING

GREASABLE
AETNA BEARING

  • OD:4.154"
  • ID:2.500"
  • THICKNESS:.865"

PILOT BEARING

  • OD:2.047"
  • ID:.787"
  • THICKNESS:.590"

BEARING & SEAL KIT

GREASABLE
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO FRONT & REAR SEALS

BEARING & SEAL KIT

FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: GREASEABLE RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS

BEARING & SEAL KIT

FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: GREASEABLE AETNA RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS

BEARING & SEAL KIT

GREASABLE
FITS FACTORY NON-TA TRACTORS
INCLUDES: RELEASE BEARING, PILOT BEARING, BUSHING, TA O-RING & IPTO FRONT & REAR SEALS

ALIGNMENT TOOL

  • LARGE SPLINE:1 3/4" - 17
  • SMALL SPLINE:1 3/16" - 11
  • PILOT DIAMETER:0.787"

HUB/BOLTS

FITS: 405300-9, 104496-9 & 405301

HUB/BOLTS

HOLES ARE IN GROUPS OF 2

LEVER ADJ SCREW W/NUT

Required: 3

  • THREAD SIZE:5/16" - 24 x 1/2"

12" LARGE CENTER CLUTCH

Top of Page

BEARING & SEAL KIT

FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: GREASEABLE AETNA RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS

CLUTCH KIT

KIT INCLUDES:
PPA
LARGE CENTER 6 PAD DISC
RELEASE BEARING & PILOT BEARINGS
(HYDRAULIC CLUTCH ASSIST SUGGESTED)
FLYWHEEL STEP 1.406"

  • SIZE:12"
  • TYPE:SINGLE STAGE
  • CORE #:152
  • CORE PRICE:$29.00

CLUTCH KIT

INCLUDES: PPA LARGE CENTER 6 PAD DISC, AETNA RELEASE BEARING & PILOT BEARING
(HYDRAULIC CLUTCH ASSIST SUGGESTED)
FLYWHEEL STEP 1.406"

  • SIZE:12"
  • TYPE:SINGLE STAGE
  • CORE #:152
  • CORE PRICE:$29.00

LARGE CENTER PRESSURE PLATE ASSEMBLY W/NEW CAST

MUST BE USED WITH 104493 OR 104494
HYDRAULIC ASSIST SUGGESTED
(NEW AVAILABLE)
FLYWHEEL STEP 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

LARGE CENTER PRESSURE PLATE ASSEMBLY

MUST BE USED WITH 104493 OR 104494
HYDRAULIC ASSIST SUGGESTED
FLYWHEEL STEP 1.406"

  • SIZE:12"
  • LEVERS:3
  • SPRINGS:12
  • HUB/SPLINE:1 3/4" - 17
  • TYPE:SINGLE STAGE
  • CORE #:145
  • CORE PRICE:$22.00*

LARGE CENTER 4 PAD DISC

HEAVY DUTY, MUST USE WITH 405301

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

LARGE CENTER 6 PAD DISC

HEAVY DUTY, MUST USE WITH 405301

  • SIZE:12"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

RELEASE BEARING ASSEMBLY KIT

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

RELEASE BEARING ASSEMBLY KIT

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

RELEASE BEARING

GREASEABLE

  • OD:4.154"
  • ID:2.500"
  • THICKNESS:.865"

RELEASE BEARING

GREASABLE
AETNA BEARING

  • OD:4.154"
  • ID:2.500"
  • THICKNESS:.865"

PILOT BEARING

  • OD:2.047"
  • ID:.787"
  • THICKNESS:.590"

BEARING & SEAL KIT

GREASABLE
FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, IPTO FRONT & REAR SEALS

BEARING & SEAL KIT

FITS: TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
INCLUDES: GREASEABLE RELEASE BEARING, PILOT BEARING, BEARING CAGE O-RING, FEDERAL MOGUL FRONT & REAR IPTO SEALS

BEARING & SEAL KIT

GREASABLE
FITS FACTORY NON-TA TRACTORS
INCLUDES: RELEASE BEARING, PILOT BEARING, BUSHING, TA O-RING & IPTO FRONT & REAR SEALS

ALIGNMENT TOOL

  • LARGE SPLINE:1 3/4" - 17
  • SMALL SPLINE:1 3/16" - 11
  • PILOT DIAMETER:0.787"

LEVER ADJ SCREW W/NUT

Required: 3

  • THREAD SIZE:5/16" - 24 x 1/2"

14" FLEX PLATE

Top of Page

FLEX PLATE

FOR HYDRO TRACTORS

  • SIZE:14"
  • HUB:1 3/16"
  • SPLINE:11
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00

FLEX PLATE

FOR HYDRO TRACTORS

  • SIZE:14"
  • HUB:1 3/8"
  • SPLINE:13
  • CENTER:SPRING
  • CORE #:130
  • CORE PRICE:$7.00*

FLYWHEEL

Top of Page

NEW FLYWHEEL

INCLUDES RING GEAR

  • SIZE:12"

NEW FLYWHEEL RING GEAR

FOR 12" FLYWHEELS WITH 132 TEETH

NEW FLYWHEEL

IF UPDATING TO A 14" FLYWHEEL MUST USE 14" CLUTCH

INCLUDES: RING GEAR
ALSO, FITS: 966 & 986 WHEN CONVERTING TO 14" CLUTCH

  • SIZE:14"
  • STEP:1.938

NEW FLYWHEEL RING GEAR

FITS: 14" FLYWHEEL ONLY

  • TEETH:132

CLUTCH RELEASE PARTS

Top of Page

CLUTCH SHAFT KIT

KIT INCLUDES:
380180 CLUTCH SHAFT
380110 RELEASE FORK
380109K RELEASE BEARING CARRIER

RELEASE BEARING ASSEMBLY KIT

INCLUDES: RELEASE BEARING & RELEASE BEARING CARRIER

RELEASE BEARING ASSEMBLY KIT

INCLUDES: AETNA RELEASE BEARING & RELEASE BEARING CARRIER

RELEASE BEARING

GREASEABLE

  • OD:4.154"
  • ID:2.500"
  • THICKNESS:.865"

RELEASE BEARING

GREASABLE
AETNA BEARING

  • OD:4.154"
  • ID:2.500"
  • THICKNESS:.865"

IPTO

Top of Page

NEW IPTO GEAR KIT

S/N 17001 & ABOVE

FITS TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATION KIT INSTALLED
INCLUDES IPTO: SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING, FRONT & REAR SEALS

  • # SPLINES:17
  • OD:1 3/4"
  • DEGREE:25
  • # TEETH:26

NEW IPTO GEAR KIT

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATION KIT INSTALLED
KIT INCLUDES: IPTO SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FEDERAL MOGUL FRONT & REAR IPTO SEALS

NEW IPTO GEAR KIT

S/N 17000 & BELOW

FITS TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATION KIT INSTALLED.
KIT INCLUDES IPTO: SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FRONT & REAR SEALS

  • # SPLINES:17
  • #TEETH:28
  • OD:1 3/4"
  • DEGREE:25

NEW IPTO GEAR KIT

S/N 17000 & BELOW

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATION KIT INSTALLED
KIT INCLUDES: IPTO SHAFT, BEARING, BEARING CAGE, BEARING CAGE O-RING & FEDERAL MOGUL FRONT & REAR IPTO SEALS

NEW IPTO

S/N 17001 & ABOVE

FITS TRACTORS WITH OR WITHOUT TA

  • # SPLINES:17
  • #TEETH:26
  • OD:1 3/4"
  • DEGREE:25

IPTO

S/N 17000 & BELOW

FITS TRACTORS WITH OR WITHOUT TA

  • # SPLINES:17
  • #TEETH:28
  • OD:1 3/4"
  • DEGREE:25

IPTO BEARING CAGE

FITS TRACTORS WITH TA OR THAT HAVE HAD TA ELIMINATOR INSTALLED

IPTO BUSHING

FITS TRACTORS WITHOUT TA

IPTO BUSHING

FITS TRACTORS WITH TA

IPTO BEARING

ROLLER TYPE

SEAL KIT

FITS TRACTORS WITH TA
INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22414

SEAL KIT

FITS TRACTOR WITH TA

KIT CONTENTS:
535208R92 DOUBLE SHELL SEAL, 535209R92 DOUBLE SHELL SEAL & 22414 ORING (BEARING CAGE)

SEAL KIT

FITS TRACTORS WITH TA
INCLUDES: 1 - 535208FM FEDERAL MOGUL SEAL, 1 - 535209FM FEDERAL MOGUL SEAL & 1 - 22414 BEARING CAGE O-RING

SEAL KIT

FITS: FACTORY NON-TA TRACTORS
INCLUDES: 1 - 535208, 1 - 535209 & 1 - 22419
DOES NOT INCLUDE BUSHING

SEAL KIT W/BUSHING NON-TA

FITS FACTORY NON-TA TRACTORS;
INCLUDES: 1-535208, 1-535209, 1-22419 & 1-384185

BEARING CAGE O-RING

FITS TRACTORS WITH TA

TORQUE AMPLIFIER O-RING

FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE

IPTO REAR SEAL

INNER
FITS TRACTORS WITH OR WITHOUT TA

IPTO REAR SEAL

INNER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

IPTO REAR SEAL

FEDERAL MOGUL REAR/INNER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

IPTO FRONT SEAL

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA

IPTO FRONT SEAL

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

IPTO FRONT SEAL

FEDERAL MOGUL FRONT/OUTER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

TORQUE AMPLIFIER

Top of Page

TORQUE AMPLIFIER KIT

3 YEAR WARRANTY ON TA ONLY
INCLUDES: TA, GASKETS, QUILL, MCV PUMP & LOWER GEAR

  • UPPER GEAR: #TEETH/DEGREE:22 - 25
  • # DD DISCS:3
  • # TA DISCS:2
  • LOWER GEAR: #TEETH/DEGREE:51 - 25
  • CORE #:291/261
  • TA CORE PRICE:$125.00
  • LOWER GEAR CORE PRICE:$25.00

TORQUE AMPLIFIER KIT

KIT INCLUDES:
TA
GASKET KIT
QUILL
MCV PUMP
LOWER GEAR
5 YEAR WARRANTY

  • UPPER GEAR: #TEETH/DEGREE:22 - 25
  • # DD DISCS:4
  • # TA DISCS:2
  • LOWER GEAR: #TEETH/DEGREE:51 - 25
  • CORE #:291/261
  • TA CORE PRICE:$125.00
  • LOWER GEAR CORE PRICE:$25.00

TORQUE AMPLIFIER

3 YEAR WARRANTY, OEM
3 DIRECT DRIVE DISCS & 2 ANTI-FREE WHEEL DISCS
INCLUDES: LOWER GEAR

  • UPPER GEAR: #TEETH/DEGREE:22 - 25
  • # DD DISCS:3
  • # TA DISCS:2
  • LOWER GEAR: #TEETH/DEGREE:51 - 25
  • CORE #:291/261
  • TA CORE PRICE:$125.00
  • LOWER GEAR CORE PRICE:$25.00

TORQUE AMPLIFIER

HEAVY DUTY
5 YEAR WARRANTY
4 DIRECT DRIVE DISC & 2 ANTI-FREE WHEEL DISC
INCLUDES: LOWER GEAR

  • UPPER GEAR: #TEETH/DEGREE:22 - 25
  • # DD DISCS:4
  • # TA DISCS:2
  • LOWER GEAR: #TEETH/DEGREE:51 - 25
  • CORE #:291/261
  • TA CORE PRICE:$125.00*
  • LOWER GEAR CORE PRICE:$25.00*

TORQUE AMPLIFIER

6 YEAR WARRANTY
HEAVY DUTY
4 DIRECT DRIVE DISC AND 3 ANTI-FREE WHEEL DISC
INCLUDES: LOWER GEAR

  • UPPER GEAR: #TEETH/DEGREE:22-20
  • # DD DISCS:4
  • # TA DISCS:3
  • LOWER GEAR: #TEETH/DEGREE:51-20
  • CORE #:291 / 261
  • TA CORE PRICE:$125.00
  • LOWER GEAR CORE PRICE:$25.00

TA W/SUPPORT BEARING

6 YEAR WARRANTY
HEAVY DUTY
4 DIRECT DRIVE DISC AND 3 ANTI-FREE WHEEL DISC
INCLUDES: LOWER GEAR

  • TA CORE PRICE:$125.00
  • LOWER GEAR CORE PRICE:$25.00

12 GPM PUMP W/NUT & O-RINGS

MCV OR STEERING HYDRAULIC PUMP

  • GPM:12
  • THREAD SIZE:1/2" X 20

QUILL

INCLUDES: INNER BEARINGS PRE-INSTALLED

TORQUE AMPLIFIER GASKET KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT

TORQUE AMPLIFIER GASKET KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

TA SHAFT OIL SLINGER

NOTE: FLAT SIDE GOES TO TA

DIRECT DRIVE DISC KIT

KIT INCLUDES:
3-PAPER DISCS
1-METALLIC DISC

TA SHIM (THIN)

REQUIRED: AS REQUIRED

SHIM KIT

INCLUDES: 30 - .015" TA SHIMS

TA SHIM (THICK)

REQUIRED: AS REQUIRED

SHIM KIT

INCLUDES: 30 - .032" TA SHIMS

TA SHIM KIT

INCLUDES: 15 - .015" TA SHIMS & 15 - .032" TA SHIMS

STEEL COUNTERSHAFT SPACER

USED TO ALIGN CONSTANT MESH GEARS WHEN SHIMMING TA
INCLUDES: 12 - .024 & 12 - .044 THICK SPACERS

TORQUE AMPLIFIER ELIMINATORS

Top of Page

TA ELIMINATION SHAFT

REPLACEMENT SHAFT FOR TA ELIMINATED AND OEM NON-TA TRACTORS
INCLUDES: INNER BEARING PRE-INSTALLED

IPTO BUSHING

FITS TRACTORS WITHOUT TA

TORQUE AMPLIFIER ELIMINATION KIT

529434 SPEED TRANSMISSION MAIN SHAFT ALSO REQUIRED IF EXISTING MAIN SHAFT IS NOT DRILLED THROUGHT CENTER

TORQUE AMPLIFIER ELIMINATION KIT W/GASKET

529434 SPEED TRANSMISSION MAIN SHAFT ALSO REQUIRED IF EXISTING MAIN SHAFT IS NOT DRILLED THROUGHT CENTER

TORQUE AMPLIFIER GASKET KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT

TORQUE AMPLIFIER GASKET KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

TRANSMISSION GEARS AND SHAFTS

Top of Page

NEW REVERSE PARK GEAR

  • # SPLINES:17
  • DEGREE:20
  • # TEETH:35

NEW 1ST/2ND SPEED SLIDING GEAR

  • DEGREE:25
  • # TEETH:41 AND 46

TA LOWER GEAR

MUST POSITIVELY IDENTIFY TOOTH DEGREE.

  • DEGREE:25
  • # TEETH:51
  • CORE #:261
  • CORE PRICE:$25.00

MAIN SPEED SHAFT

FITS APPLICATIONS WITH OR WITHOUT TA

QUILL

INCLUDES: INNER BEARINGS PRE-INSTALLED

TA ELIMINATION SHAFT

REPLACEMENT SHAFT FOR TA ELIMINATED AND OEM NON-TA TRACTORS
INCLUDES: INNER BEARING PRE-INSTALLED

QUILL HOUSING

  • CORE #:221
  • CORE PRICE:4.00

NEW COUNTERSHAFT

LEFT HAND THREAD, REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED

NEW HD COUNTERSHAFT

LEFT HAND THREAD
HEAVY DUTY THICK WALL
REQUIRES THE ADDITION OF ONE 71147C1 SPLINED FRONT SPACER, IF ONE IS NOT ALREADY BEING USED

COUNTERSHAFT SPACER

SPLINED FRONT SPACER

SNAP RING

MODELS WITH OUT TA

COUNTERSHAFT CONSTANT MESH GEAR STOP

NEW COUNTERSHAFT NUT

LEFT HAND THREADS, USED WITH 148951 AND 380082 LH COUNTERSHAFTS

NEW COUNTERSHAFT NUT

RIGHT HAND THREADS

NEW COUNTERSHAFT LOCK WASHER

USED WITH 380092 RIGHT HAND NUT

PINION DEPTH GAGE - RENTAL

REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT

  • CORE PRICE:$100.00

PINION DEPTH GAGE (RENTAL CORE CHARGE)

REQ. WHEN ORDERING PART NUMBER 9203

TRANSMISSION COVERS AND SHIFT PARTS

Top of Page

SPEED COVER

DOUBLE HOLE; INCLUDES: GASKET

  • CORE #:230
  • CORE PRICE:$8.00

SHIFT DETENT

FOR SPEED TRANSMISSION

NEW CAM PIVOT SHAFT

INCLUDES: O-RING
FITS: SPEED TRANSMISSION.

NEW CONTROL ARM KIT

FITS SPEED COVER

MADE IN USA
INCLUDES: CONTROL ARM, ROLLER & SPRING

NEW DETENT ROLLER

2 REQ. FOR RANGE TRANSMISSION, 3 REQ. FOR SPEED TRANSMISSION

RANGE COVER

INCLUDES: MISC. PLUGS AND GASKET
FILLER TUBE NOT INCLUDED

  • CORE #:230
  • CORE PRICE:$8.00*

CONTROL ARM KIT

FOR RANGE TRANSMISSION

CONTROL ARM KIT

FOR RANGE TRANSMISSION
MADE IN USA

PARK LOCK LINK

NEW SPRING LOADED

LEFT HAND BOLT

PARK LOCK LINK REPLACEMENT

RIGHT HAND BOLT

PARK LOCK LINK REPLACEMENT

TRANSMISSION BRAKE ARM W/PAD

FITS TRACTORS WITH MECHANICAL TRANSMISSION BRAKE

TRANSMISSION BRAKE LINK

FOR TRACTORS WITH MECHANICAL TRANSMISSION BRAKE

TRANSMISSION GASKETS AND SEALS

Top of Page

DIFFERENTIAL GASKET KIT

RING GEAR & PINION / DIFFERENTIAL

SEAL RING

TOP COVER PRESSURE PORT

TEFLON PUMP FLANGE SEAL RING

OPTION FOR 386867 O-RING

TORQUE AMPLIFIER GASKET KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT

TORQUE AMPLIFIER GASKET KIT

FOR TA INSTALLATION
INCLUDES: 393877 MCV OVERHAUL KIT
FEDERAL MOGUL IPTO SEALS

O-RING

SPLIT O-RING
1 1/4" ID

O-RING

TRANSMISSION BRAKE SHAFT O-RING

  • OD:1"
  • ID:13/16"
  • THICKNESS:3/32"

MCV GASKET KIT W/SPRING KIT

MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT
FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
DOES NOT FIT FACTORY NON-TA TRACTORS.

QUAD RING

FOR TA SELECTOR VALVE

BEARING CAGE O-RING

FITS TRACTORS WITH TA

TORQUE AMPLIFIER O-RING

FITS TA HOUSING OR FACTORY NON-TA BEARING CAGE

IPTO FRONT SEAL

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA

IPTO FRONT SEAL

FEDERAL MOGUL FRONT/OUTER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

IPTO FRONT SEAL

FRONT/OUTER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

IPTO REAR SEAL

INNER
FITS TRACTORS WITH OR WITHOUT TA

IPTO REAR SEAL

FEDERAL MOGUL REAR/INNER IPTO SEAL
FITS TRACTORS WITH OR WITHOUT TA

IPTO REAR SEAL

INNER
FITS TRACTORS WITH OR WITHOUT TA
DOUBLE SHELL SEAL

MCV PUMPS / STEERING PUMPS

Top of Page

MCV PUMP GEAR

  • DEGREE:25
  • # TEETH:19

NYLOC NUT

FITS: MCV PUMP

  • THREAD SIZE:1/2" X 20

KEY FOR PUMP SHAFT

FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW

MCV GASKET KIT W/SPRING KIT

MCV OVERHAUL KIT; INCLUDES: MCV GASKETS, SPRING KIT & O-RING KIT
FOR TRACTORS WITH TA OR THAT HAVE HAD A TA ELIMINATOR INSTALLED
DOES NOT FIT FACTORY NON-TA TRACTORS.

QUAD RING

FOR TA SELECTOR VALVE

HYDRAULIC PUMP & PARTS

Top of Page

17 GPM HYD PUMP W/NUT & O-RING

OPTIONAL FOR 70931 NEW AND 70932 NEW

WITH NUT, KEY & O-RINGS

  • GPM:17

15 GPM HYD PUMP W/NUT & ORING

OPTION FOR 70931 NEW

W/NUT, KEY AND O-RINGS
NOT COMPATIBLE WITH PIGGY BACK PUMP

  • GPM:15

12 GPM HYD PUMP W/NUT & O-RING

W/NUT, KEY AND O-RINGS
NOT COMPATIBLE WITH PIGGY BACK PUMP

  • GPM:12

NYLOC NUT

FITS: 7031, 70932, 70933 & 70935

  • THREAD SIZE:5/8" X 18

KEY FOR PUMP SHAFT

FITS: 70931 NEW, 70932 NEW, 70933 NEW & 70935 NEW

TEFLON PUMP FLANGE SEAL RING

OPTION FOR 386867 O-RING

REAR PTO KITS

Top of Page

PTO KIT W/NEW BRAKE PISTONS

COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS.
FOR UNITS WITH SPRING ACTIVATED BRAKES

HEAVY DUTY PTO KIT W/NEW BRAKE PISTONS

COMPLETE OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS, CLUTCH PACK AND BRAKE PISTONS.
FOR UNITS WITH SPRING ACTIVATED BRAKES

PTO KIT

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH SPRING ACTIVATED BRAKES

HEAVY DUTY PTO KIT

OVERHAUL PACKAGE INCLUDING GASKETS, O-RINGS, SEALS AND CLUTCH PACK.
DOES NOT INCLUDE BRAKE PISTONS
FOR UNITS WITH SPRING ACTIVATED BRAKES

PTO GASKET KIT

COMPLETE GASKET, O-RING & SEAL PACKAGE
FOR UNITS WITH SPRING ACTIVATED BRAKES

PTO GASKET KIT

COMPLETE GASKET, O-RING & SEAL PACKAGE WITH HEAVY DUTY CLUTCH DRUM SEAL RINGS
FOR UNITS WITH SPRING ACTIVATED BRAKES

PTO GASKET KIT - SHORT

GASKET & O-RING PACKAGE
FOR CLUTCH DRUM SERVICE ONLY

PTO GASKET KIT - SHORT

INCLUDES: CAST CLUTCH DRUM SEAL RINGS

OEM PTO KIT

CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES

HEAVY DUTY PTO KIT

CONTAINS: 12 STEEL PLATES & 5 FIBER PLATES

PTO KIT

CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES

HEAVY DUTY PTO KIT

CONTAINS: 9 STEEL PLATES & 7 FIBER PLATES

PTO KIT

THIS CLUTCH PACK IS HIGHLY RECOMMENDED FOR EXTREMELY HEAVY OR CONTINUOUS PTO USE APPLICATIONS

CONTAINS: 10 INTERNAL TOOTH & 10 EXTERNAL TOOTH FRICTION PLATES

REAR PTO PARTS

Top of Page
TBA
TBA

SPACER

W/DUAL SPEED PTO

INDEPENDENT PTO OUTPUT SHAFT SPACER
(540 RPM)

TBA
TBA

NEEDLE BEARING

TBA
TBA

NEEDLE BEARING

TBA
TBA

THRUST WASHER

W/DUAL SPEED PTO

PTO VALVE HOUSING

FOR USE WITH SPRING ACTIVATED BRAKES

  • CORE #:231
  • CORE PRICE:$50.00*

NEW 1000 RPM PTO SHAFT

S/N 29830 & BELOW REQUIRES: 1-68625C1 CLUTCH DRUM RETAINING SNAP RING

PTO GASKET

PTO UNIT TO TRACTOR

SNAP RING

PTO CLUTCH DRUM RETAINING SNAP-RING

SNAP RING

540 & 1000 RPM REAR PTO OUTPUT SHAFTS

PTO SEAL ADAPTER

INCLUDES: SEAL, EXTERNAL REPAIR FOR 540 RPM SHAFT SEAL LEAKAGE

BRAKE PISTON

FOR UNITS WITH SPRING APPLIED BRAKES
3 REQUIRED

BRAKE PISTON

FOR UNITS WITH SPRING APPLIED BRAKES, (NEW AVAILABLE)
3 REQUIRED

OIL SEAL

CONTROL VALVE SEAL

PTO DUST BOOT

FOR CONTROL VALVE

SEAL

FITS: 540 RPM AND 1 3/8" 1000 RPM SHAFTS
2 REQUIRED

SEAL RING

TEFLON CLUTCH DRUM SEAL RING

PTO SEAL RING

CAST CLUTCH DRUM SEAL RING
HD OPTION FOR 381485

O-RING

CLUTCH DRUM TO SHAFT O-RING

O-RING

CLUTCH PISTON INNER O-RING

PTO DISC

PTO CLUTCH FRICTION DISC
Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK

HD PTO CLUTCH FRICTION DISC

HD OPTION FOR 381490
Required: 5 FOR OEM CLUTCH PACK OR 7 FOR HEAVY DUTY CLUTCH PACK

PTO SEPARATOR PLATE

Required: 12 FOR OEM CLUTCH PACK OR 9 FOR HEAVY DUTY CLUTCH PACK

FRICTION PLATE

51 INTERNAL TEETH WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863971

FRICTION PLATE

6 EXTERNAL TABS WITH FRICTION MATERIAL ON 1 SIDE
CAN ONLY BE USED WITH 1863972

WATER PUMP

Top of Page

WATER PUMP

INCLUDES: HUB, 8 FIN IMPELLER & MOUNTING GASKET

  • CASTING #:675806C1, 677856C2
  • CORE #:550
  • CORE PRICE:$40.00

WATER PUMP

D-414

INCLUDES: HUB, 4 FIN IMPELLER AND MOUNTING GASKET
CAN USE 672644 WATER PUMP W / 8 FIN IMPELLER

  • CASTING #:675806C1, 677856C2
  • CORE #:550
  • CORE PRICE:$40.00

CAMSHAFT

Top of Page

CAMSHAFT W/SMALL LIFTERS & GEAR

INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1" LIFTERS

  • CORE #:541
  • CORE PRICE:$10.00

CAMSHAFT W/LARGE LIFTERS & GEAR

INCLUDES: DRIVE GEAR, THRUST PLATE & 12 NEW 1 1/8" LIFTERS

  • CORE #:541
  • CORE PRICE:$10.00

CAMSHAFT

INCLUDES: DRIVE GEAR AND THRUST PLATE; ORDER LIFTERS

CAMSHAFT

W/O GEAR, ORDER LIFTERS SEPARATELY

NEW LIFTER

1 1/8"
Required: 12

NEW LIFTER

1"
Required: 12

BRAKES

Top of Page

BRAKE DISC

REQUIRED: 2 PER SIDE
  • OD:8"
  • SPLINES:12

FRONT END PARTS

Top of Page

TIE ROD ASSEMBLY

REQUIRED: 1 PER SIDE

TIE ROD END

INNER
Required: 1 PER SIDE

LH STEERING ARM-SPLIT DESIGN

24 SPLINES WITH NUT AND BOLT

RH STEERING ARM - SPLIT DESIGN

24 SPLINES WITH NUT AND BOLT

STEERING PIN AND BLOCK KIT

S/N 32805 & BELOW

REAMER RENTAL IS AVAILABLE FROM AG PARTS, LTD.

REAMER - RENTAL

S/N 32805 & BELOW

REQ. FOR INSTALLATION OF 830411 PIN KIT

  • CORE PRICE:$1000.00

REAMER - RENTAL CORE CHARGE

S/N 32805 & BELOW

REQ. WHEN ORDERING PART NUMBER 9206

BLOCK

S/N 32805 & BELOW

PIN

S/N 32805 & BELOW

REAMER

FOR INSTALLATION OF 830411 PIN KIT

TOOLS

Top of Page

#60 TA GAUGE

GLYCERIN FILLED
USED TO CHECK TA LUBE PRESSURE

#600 TA GAUGE

GLYCERIN FILLED
USED TO CHECK TA CLUTCH PRESSURE

SUMP CHECK PLUG

USED TO CHECK FOR SUMP CHECK VALVE LEAKAGE

REAR MAIN SEAL INSTALLATION TOOL

FOR INSTALLATION OF 1809964 REAR MAIN SEAL

PINION DEPTH GAGE - RENTAL

REQ. FOR INSTALLATION OF 528707 RING GEAR/PINION AND 120265 RING GEAR/PINION UPDATE KIT

  • CORE PRICE:$100.00

PINION DEPTH GAGE (RENTAL CORE CHARGE)

REQ. WHEN ORDERING PART NUMBER 9203

REAMER - RENTAL

REQ. FOR INSTALLATION OF 830411 PIN KIT

  • CORE PRICE:$1000.00

REAMER - RENTAL CORE CHARGE

REQ. WHEN ORDERING PART NUMBER 9206

ALIGNMENT TOOL

  • LARGE SPLINE:1 3/4" - 17
  • SMALL SPLINE:1 3/16" - 11
  • PILOT DIAMETER:0.787"
AP Air, INC.
AP Truck Parts
AG PARTS ONLINE
RF Engine
ROMAINE ELECTRIC
Spencer Diesel

Shopping Cart Update Cart ()

Loading...